Description

Description: The ultrasonic atomizing nozzle is divided into two stages. The first phase of the atomization process is first mixed with compressed air to produce a small atomization droplet to expel the nozzle. When the atomized droplet touches the ultrasonic generator at the front of the nozzle, it is immediately micro-atomized. The smallest drop is called the second stage. In fact, the advantage is that the front end of the nozzle is equipped with a specially designed ultrasonic generator. Using the fluid to strike the energy of the metal at a high speed, the ultrasonic generator oscillates at a high frequency, and the atomized droplets are micro-atomized again. Compared with the general two-fluid nozzle, this series of ultrasonic atomization nozzle produces more uniform particle size and better atomization effect The air consumption of a single nozzle at 80 degrees is 106 liters/min, and the bottom air intake (the thread is 2 minutes, we will equip the quick release joint for 2 minutes to turn the outer diameter of the 8MM hose) the air pressure is controlled at about 5 kg by the air pressure regulating valve, on the side Inlet liquid (thread 1 minute, we will equip 1 minute to turn 8MM hose quick release joint) liquid pressure is controlled between 0.8-1.2 kg with hydraulic regulating valve, which will get a better atomization effect. Parameter: Product Name: Ultrasonic Spray Nozzle Air interface: 1/4 " Liquid interface: 1/8 " Effect: dry mist Diameter: 10μm Material: 304 stainless steel